Cell Area Code - AT&T TL86109 User Manual

Telephone settings
Handset settings

Cell area code

Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
1. Press the MENU softkey on the handset in idle mode to
enter the main menu.
2. Press CID or DIR to highlight Directory, then press the
SELECT softkey.
3. Press CID or DIR to highlight a desired downloaded
directory, then press the SELECT softkey.
4. Press CID or DIR to highlight Cell area code, then
press the SELECT softkey.
5. Use the dialing keys to enter the desired cell area code.
• Press
OFF
• Press CID
the right.
6. Press the SET softkey to confirm. You hear a confirmation tone.
NOTE: If, in the future, your telephone service provider requires you to dial 10 digits
to make a local call (area code + telephone number), or, if you move to a location that
requires it, delete your home and cell area codes you have already programmed following
the steps above. After you have deleted the home and cell area codes, _ _ _ appears in
the display.
/CLEAR to erase a digit.
to move the cursor to the left or DIR to
37
DIRECTORY
Home
Cel l phone A
Cel l phone B
BACK SELECT
CELL PHONE A
Review
Cel l area code
Last update
BACK SELECT
CELL AREA CODE
---
BACK SET