Bluetooth
Bluetooth setup
8.
The telephone base then displays Connect cell
to base? Press the YES softkey to connect your
cell phone to the telephone base. The telephone
base displays Device connected to the base. The
corresponding status icon (
corresponding device light on the telephone base
(DEVICE A or DEVICE B) turns on.
•
If you already have two devices on the active
devices list, the telephone base screen displays
Max. connectable devices is two and you are prompted to replace
an existing device on the active devices list (page 23).
NOTE: The pairing process may take up to one minute. If the pairing process fails,
try again.
Auto connection
When a cell phone is successfully paired with the
telephone base but fails to connect to the telephone base,
the telephone base displays Connection failed and then
Enable auto-connect?
•
You can press the YES softkey to confirm, the telephone
base displays Auto-connect function enabled.
-OR-
•
Press the NO softkey to exit.
You can also connect a device manually (page 20).
A or
B) displays. The
16
Connect cel l
to base?
YES
NO
Device
connected
to the base
Enable
auto-connect?
YES
NO
Auto-connect
function
enabled