Cell Area Code - AT&T TL92270 User Manual

Handset settings
Telephone settings

Cell area code

If you have downloaded a directory from your cell phone, you may need
to set the cell area code in order to dial a number from the downloaded
directory correctly.
Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
Press MENU/
1.
CID or DIR to highlight Directory, then press
2. Press
CID or DIR to highlight a desired downloaded directory, then
3. Press
press /SELECT.
MENU
4. Press CID or DIR to highlight Cell area code, then press
5. Use the dialing keys to enter the desired cell area code.
• Press
MUTE
• Press and hold
CID
• Press
/SELECT to confirm. You hear a confirmation tone.
6. Press
MENU
on the handset in idle mode to enter the main menu.
SELECT
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
to move the cursor to the left or DIR to the right.
33
/SELECT.
MENU
/SELECT.
MENU