Connect A Paired Device; Disconnect A Paired Device; Review The Device List - AT&T DAL75121 Complete User's Manual

Bluetooth
Bluetooth setup

Connect a paired device

If you need to connect your paired cell phone to the telephone base manually:
1. Press CELL 1 and/or CELL 2 on the telephone base when it is not in use. The
CELL 1 and/or CELL 2 light flashes.
2. When the cell phone is connected to the telephone base, you hear two
beeps. The corresponding status icon (
device light (CELL 1 and/or CELL 2) turns on.

Disconnect a paired device

If you need to disconnect a paired cell phone from the telephone base, refer to
the user's manuals of your cell phone for instructions to disconnect a Bluetooth
device.
If you press and hold CELL 1 and/or CELL 2 on the telephone base, the existing
paired cell phone in that slot will be erased. See Add a cell phone (page 21)
on how to pair and connect a new cell phone.

Review the device list

1. Press MENU/
2. Press CID or
/SELECT.
press
MENU
/SELECT again to select Device list.
3. Press
MENU
on the handset in idle mode.
SELECT
to highlight Bluetooth, then
1
or ) displays. The corresponding
2
25
Bluetooth
ECO
Device list
ECO