Network Settings - Epson WF-C869R User Manual

User's Guide

Network Settings

Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from the following and then
follow the instructions on the LCD panel.
❏ Router
❏ Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏ Device Name
❏ TCP/IP
❏ Proxy Server
❏ Email Server
❏ IPv6 Address
❏ MS Network Sharing
❏ NFC
❏ Link Speed & Duplex
❏ Redirect HTTP to HTTPS
❏ Disable IPsec/IP Filtering
❏ Disable IEEE802.1X
Related Information
"Making Wi-Fi Settings Manually" on page 31
&
"Making Wi-Fi Settings by Push Button Setup (WPS)" on page 32
&
"Making Wi-Fi Settings by PIN Code Setup (WPS)" on page 33
&
"Making Wi-Fi Direct (Simple AP) Connection Settings" on page 34
&
"Checking Detailed Network Information from the Control Panel" on page 37
&
"Printing a Network Status Sheet" on page 41
&
Menu Options for Settings
208