Report Settings; Basic Settings - Epson WF-C869R User Manual

User's Guide
Quiet Mode:
Reduces the noise the printer makes when printing faxes, however, print speed may be
reduced.

Report Settings

Select the menu on the control panel as described below.
Settings > General Settings > Fax Settings > Report Settings
Forwarding Report:
Prints a report after forwarding a received document.
Backup Error Report:
Prints a report when a backup error for sending faxes occurs.
Fax Log Auto Print:
Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specified time. However, if the number of fax jobs
exceeds 30, the log is printed before the specified time.
Attach Image to Report:
Prints a Transmission Report with an image of the first page of the sent document. Select On(Large
Image) to print the upper part of the page without reducing. Select On(Small Image) to print the
entire page reducing it to fit onto the report.
Report Format:
Select a format for fax reports other than Protocol Trace. Select Detail to print with error codes.
Output Method:
Select an output method for fax reports.

Basic Settings

Select the menus on the control panel as described below.
Settings > General Settings > Fax Settings > Basic Settings
Fax Speed:
Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a communication
error occurs frequently, when sending/receiving a fax to/from abroad, or when you are using an IP
(VoIP) phone service.
ECM:
Automatically corrects errors in the fax transmission (Error Correction Mode), mostly caused by
telephone line noise. If this is disabled, you cannot send or receive documents in color.
Faxing
176