Using An Email Server; Configuring Mail Server - Epson WF-C869R User Manual

User's Guide
Mac OS X
Select a corresponding device icon. The data on the external USB device is displayed.
Note:
❏ To remove an external USB device, drag and drop the device icon to the trash icon. Otherwise, data in the shared drive
may not be displayed correctly when another external USB device is inserted.
❏ To access an external storage device through the network, select Go > Connect to Server from the menu on the desktop.
Enter a printer name cifs://XXXXX or smb://XXXXX (Where "xxxxx" is the printer name) in the Server Address, and
then click Connect.

Using an Email Server

To use email features, such as scan or fax forwarding features, you need to configure the email server.

Configuring Mail Server

Check the following before configuring the email server.
❏ The printer is connected to the network.
❏ The email server information, such as the documents from your service provider that you used to setup the
email on your computer.
Note:
If you use a free email service, such as Internet email, search the Internet to get the email server information you need.
1. Tap Settings on the home screen.
2. Tap General Settings > Network Settings > Advanced.
3. Tap Email Server > Server Settings.
4. Select the authentication method of the email server you are using.
Important:
c
The following authentication methods are available.
❏ Off
❏ POP before SMTP
❏ SMTP-AUTH
Contact your internet service provider to confirm the authentication method of the email server.
The printer may not be able to communicate with an email server even if the authentication method is
available since security may be enhanced (for example SSL communication is necessary). Visit the Epson
support website for the latest information.
http://www.epson.eu/Support
http://support.epson.net/
Appendix
(Europe)
(outside Europe)
302