Epson WF-C869R User Manual page 136

User's Guide
1. Tap Settings on the home screen.
2. Tap General Settings > Fax Settings > Basic Settings.
3. Tap > Header, tap the Your Phone Number box, there enter your phone number, and then tap OK.
4. Tap one of the boxes under the Fax Header list, enter the fax header information, and then tap OK.
Related Information
"Basic Settings" on page 176
&
Sending a Fax with a Selected Header
When you send a fax, you can select header information for the recipient. To use this feature, you must register
multiple headers in advance.
1. Tap Fax on the home screen.
2. Tap the Fax Settings tab.
3. Tap Add Sender Information in the Fax Send Settings group.
4. Select where you want to add your sender information.
❏ Outside of Image: Sends a fax with header information in the top white margin of the fax. This keeps the
header from overlapping with the scanned image, however, the fax received by the recipient may be printed
across two sheets depending on the size of the originals.
❏ Inside of Image: Sends a fax with header information approximately 7 mm lower than the top of the
scanned image. The header may overlap with the image, however, the fax received by the recipient will not
be split into two documents.
❏ Off: Sends a fax with no header information.
5. Tap Fax Header, select the header you want to use, and then tap OK.
6. Tap one of the Additional Information options as necessary.
Related Information
"Fax Settings" on page 168
&
Sending a Fax Notification
You can send an email containing information on the results of sending the fax.
Note:
To use this feature, you must do the followings on advance:
❏ Make mail server settings in the printer
❏ Register the email address to which you want to send the results
1. Tap Fax on the home screen.
Faxing
136