User's Guide
Note:
Some sizes may not be automatically detected. In this situation, manually select the size of the originals.
Related Information
"Available Originals for the ADF" on page 57
&
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
❏ Placing the originals in the up direction: Select Up Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) > Up Direction
Place the originals on the ADF in the direction of the arrow.
❏ Placing the originals in the left direction: Select Left Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) > Left Direction
Place the originals on the ADF in the direction of the arrow.
Placing Originals on the Scanner Glass
Caution:
!
Be careful not to trap your fingers when closing the document cover. Otherwise you may be injured.
Important:
c
When placing bulky originals such as books, prevent exterior light from shining directly onto the scanner glass.
Placing Originals
60