Settings: Independents; Settings: Console - ETC ColorSource 20 User Manual

Settings: Independents

Setup for the two independent control channels.
Independents
machines such as smoke machines or mirror balls.
In this tab, the following settings for independents can be set:
Universe and DMX - an independent can be assigned to a DMX address on a given universe.
Level - sets the on level for the independent.
Bump - sets the
Blackout - sets whether the independent is included or excluded from blackout.

Settings: Console

Setup of the console and its buttons and faders can be done on this tab.
You can adjust the DMX speed. You should choose the fastest setting that works correctly with all your
equipment, normally with modern devices this should be Max or Fast.
You can adjust the backlight for the touchscreen and the brightness of the buttons. 1 is the dimmest setting
and 7 is the brightest.
You can enable an external monitor connected via the HDMI video port. When enabled, you can configure
the video mode to either 1920x1080p-60 or 640x480p-60.
Note:
You can assign the five right-most buttons beneath the screen to the following functions:
None
Audio Mute
Back
Blackout
Color
Cue List
Effects
GO
Ind 1
Ind 2
Keypad
Media
Media Pause
Pause
Parameter
Playback Toy
Quick Select
S2L Lights
S2L VideoToy
Speed Clear
Stage Map
System Settings and Setup
may be used to control lights, for instance the house lights, or accessories and small
bump button operation to a momentary bump or an on-off toggle.
Enabling an external monitor will disable video toy and image playback.
71