Tap Tempo; Pause; Back - ETC ColorSource 20 User Manual

Stopped sequences are indicated by a blue bump button.
Stopped sequences may be advanced by pressing the blue bump button.
Note:

Tap Tempo

Places the
Hold Tap and press the bump of a playback carrying a sequence (shown in yellow on the bump) in the
rhythm you want for the sequence rate.
Press several times until the rate is correct.
Tap can be assigned to a bottom button by going to the
GO
Advances the
The next position may be the following entry in the cue list, or it may be somewhere else if you are jumping
to another
The live cue is displayed surrounded by a yellow box with the next cue beneath it.
Press GO twice or more to rapidly advance to further cues.

Pause

Stops the
Press GO
Press

Back

Back
Reverses the
The live cue is displayed surrounded by a yellow box with the next cue beneath it and the previous cue
above it.
Press Back twice or more to rapidly return to previous cues.
40
Stopped sequences may be used as additional cue lists if required.
bump buttons for playbacks
cue list to the next position using the
cue or flag.
cue list at its current position. Any fades that are underway will be stopped.
to resume crossfading and running times.
to return to the previous cue.
cue list to the previous cue using the
carrying sequences into 'Tap' mode.
Console tab
default cue times.
default cue times.
under Setup.
Recording Your Looks For Playback