Settings: Erase - ETC ColorSource 20 User Manual

Open Sound Control (OSC)
OSC is a protocol that uses network communication (wired or wireless) to communicate between various
audio, video, and lighting devices, and other devices, such as tablets for remote control of your console.
OSC Remote control IP- sets the IP address of the device that the console will be sending
OSC output to or receiving OSC input from.
OSC Send Port - sets the port address that the console will send OSC strings to.
OSC Receive Port - sets the port address that the console will receive OSC strings from.
For a list of supported OSC commands, please see
For information about using Amigo:
Amigo Remote Web Browser
Using Help with the Amigo Remote Web Browser
Connecting the Amigo Remote Web Browser via WiFi
Connecting Amigo Remote Web Browser via Cable to a Wired Network

Settings: Erase

The following erase operations are available in this tab:
All: Erases all of the show data.
Memories: Erases all of the
Sequences: Erases all of the sequences.
Cue List: Erases all of the
Patch: Erases all of the patch.
Note:
ing a cue or playback. A cleared item can be run again, an erased item cannot be run once
removed.
System Settings and Setup
playback
cues from the
Erasing an item removes it from the show permanently. Erasure is not the same as clear-
OSC Commands (on
memories. To erase just one playback, use
cue list.
page 63).
Erase Playback.
73