Parameter, All; Parameter, Beam - ETC ColorSource 20 User Manual

Press once and release on a cell to reveal a filmstrip-style view of the available settings, with diagrams of
gobos and samples of fixed colors. The strip may be scrolled left-right until the desired setting is found.
Pick the setting to close the filmstrip.

Parameter, All

Shows all the available parameters.
Note:
Controls the parameters of the selected light(s). Only lights with parameters may be controlled here.
Pick a parameter and swipe the value box up and down to change values. A green arrow will appear on the
value box when you are swiping it.
Pick the value box with one press to open a filmstrip view of the available settings.
The filmstrip may be scrolled left <> right to see all the choices.

Parameter, Beam

Shows only the beam parameters. All parameters that are not position, intensity or color mixing are
included in the beam parameter set.
Note:
26
The Param button is only present if you have patched lights with those capabilities.
The Param button is only present if you have patched lights with those capabilities.
Controlling Your Lighting System