Goto 0; Edit Cue List; New Cue; Copy Cue - ETC ColorSource 20 User Manual

In the cue list window, press

Goto 0

Cue 0 does not exist as a real cue. It is an imaginary cue before the first cue.
Press Goto 0 to take all levels from the cue list to zero, and prepare the

Edit Cue List

The Edit Cue List option is available by pressing the Record/Edit button and then selecting Cue List. This
opens the cue list editor for the main cue stack. Here you may change cue names and the timing of fades.
Pick the cue you want to edit in the cue list in the upper part of the display. You can also insert
copy cues, and

New Cue

Inserts a new cue. The new cue is added to the next free whole-numbered cue at the end of the
The new cue may then be given another number, including a fractional or 'point' number.
For example, to insert a cue between cues 4 and 5, you would enter 4.5.
Note:

Copy Cue

Copies the selected cue and creates a new cue. The new cue is added to the next free whole-numbered
cue at the end of the
'point' number.
For example, to insert a cue between cues 4 and 5, you would enter 4.5.
Note:

Delete Cue

Deletes the selected cue.
The cue list will not be re-numbered, and the missing cue will be skipped the next time the list is played.
Note:
formed.
Recording Your Looks For Playback
More and then Goto Cue, type in the cue number, and press Enter.
delete cues.
The cue list is not re-numbered when a cue is inserted.
cue list. The new cue may then be given another number, including a fractional or
The cue list is not re-numbered when a cue is inserted.
A deleted cue may be recovered if
crossfader
Undo is pressed immediately after the deletion is per-
for the first cue.
new cues,
cue list.
35