ETC ColorSource 20 User Manual page 54

The page number or name is shown to the right of the Page - and Page + buttons. Hold the name / num-
ber button to change it.
Playback Page Selection, Plus
Picks the playback page to switch to. There are ten pages of playbacks. The page will change for the next
time a fader is raised from the zero position or a playback is launched in
button.
Note:
The page number or name is shown to the right of the Page - and Page + buttons. Hold the name / num-
ber button to change it.
Playback Page Name / Number
There are ten pages of playbacks.
The page number or name is shown to the right of the Page - and Page + buttons. Hold the name / num-
ber button to change it.
Filter, All
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can
play the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and
color mixing parts of a third playback to make a new composite playback.
The All button toggles between all parameters on and all parameters off.
Switch off a parameter to exclude it from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
Filter, Audio
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can
play the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and
color mixing parts of a third playback to make a new composite playback.
The Audio button toggles between audio on and audio off.
Switch off audio to exclude audio from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
Filter, Beam
Filtering is useful to play parts of a playback and leave other parts unaffected. Using this method you can
play the pan/tilt part of one playback, the gobo and beam parts of a second playback, and the intensity and
color mixing parts of a third playback to make a new composite playback.
The Beam button toggles between beam on and beam off.
Switch off beam to exclude it from playback when operating the blue GO buttons.
Note:
intensity button can still launch the intensity and color mixing parts of the chosen playback.
54
Faders that are up at a level will not change immediately and must first be taken to zero.
If all parameters are off, the blue GO button will not do anything. However, the mauve
If all parameters are off, the blue GO button will not do anything. However, the mauve
If all parameters are off, the blue GO button will not do anything. However, the mauve
Playback Toy on a mauve or blue
Special Functions