Include Options; Store; Cue List - ETC ColorSource 20 User Manual

Colorsource av console
Hide thumbs Also See for ColorSource 20:
Table of Contents

Advertisement

To record Media, run the media on the media screen (or from another source, for instance a
rying the desired media). You will see an option to include the running media when the cue is recorded.
Note:
cue. Clips repeated in consecutive cues do not re-start, they continue to run.
Each cue may be named, and its In, Out and Wait times set.
Note:
the in or out will not complete before the next cue starts.
Wait time = 0 is a special case and causes the cue to wait for a manual press of the GO button.

Include Options

When recording to a playback, cue, or
parameters, and
Channels:
Active: Only channels with an intensity above zero are included.
Selected: Only channels currently selected (surrounded by a green box on the
lit on the bumps) are included.
All: All channels are included.
Include:
Intensity / Color: Only the intensity and color mixing channels are included.
Position: Only the position (pan/tilt) channels are included.
Beam: Only the beam channels are included (beam includes non-fadable colors such as wheels and
scrollers).
If any media is playing, you will have the option to include it in the recording.

Store

The current lighting levels will be stored in the selected
pleted. The recording mode is then closed, and normal operation resumes.
Note:
output. To remove the newly made cue take the
to be made as changes (deltas) by leaving it up and making the necessary adjustments for each
cue, or to be made as complete new states for each cue by leaving the cues master down and
making a new state for each recording.

Cue List

A list of timed cues.
Recording Your Looks For Playback
If you want a media clip to continue across several cues just record the same clip in each
The wait time commences at the start of the cue. If wait is shorter than either in or out,
sequence
media
are included in the recording by pressing the Include Options button.
Once a cue is recorded, it is placed on the live side of the cue
step, you may specify which lighting channels, sets of
cue
or
sequence step
cues master
down. The cues master allows cues
playback
car-
stage map
or brightly
and recording will be com-
crossfader
and sent to the
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorsource 40

Table of Contents