Sharing Content - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80
Contents

Sharing content

You can connect a presentation source to one of the external
inputs of your video system. Most often a PC is used as
presentation source, but other options may be available
depending on your system setup.
While in a call you can share content with the other
participant(s) in the call (far end).
If you are not in a call, the content is shared locally on your
display.
Whether or not snapshots of input sources are shown as illustrated, depends on the software version, configuration,
and options installed on the video system. Refer to the About snapshots and remote monitoring sections
newer or ► TC7.3.0 to TC7.3.2).
D15105.05 SX80 Administrator Guide TC7.3, OCTOBER 2015.
Introduction Web interface Web interface
Navigate to: Call Control
(► TC7.3.3 or
System settings
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
17
Administrator Guide
Setting passwords Appendices
Sharing content
1. Choose a Presentation source from the
drop-down list.
2. Click Start Presentation.
Stop content sharing:
Click the Stop Presentation button that is present
while sharing.