Sharing Content - Cisco TelePresence MX300 G2 Quick Reference Manual

Sharing content

Make sure your presentation source is switched on and connected to
the video system before you tap Presentation.
Make sure your source is
connected and on. Tap
Presentation, as outlined.
Scroll horizontally (a), if
needed, to locate the
required source, as outlined.
Then tap Present (b).
You should now see the
presentation on the screen.
When the presentation is
over, tap Stop Presenting,
as outlined.
D1507702 Quick Reference Guide MX200 G2/MX300 G2/SX80 TC7.1English, April 2014
A tour of the Touch pad
Tap the touch screen
to wake up the system,
if needed.
Tap the upper left corner to
activate /deactivate the Do not
disturb feature, to activate /
deactivate the Standby feature, and
to access the Settings.
Tap Dial to Tap Contacts to
invoke the invoke the list of
dial pad. contacts including
Directory and
Tap a button
to activate its
function.
Tap the ? to Tap the Camera
contact or icon to activate
access the Help
desk, if available. camera settings.
Tap Meetings Tap
to invoke a list Messages
of upcoming to invoke the
Favorites, scheduled voice mail
meetings. system, if
History. applicable.
Quick Reference Guide
Cisco TelePresence MX300 G2
Scroll in lists
as on a smart
phone.
self-view and
Time of day is
indicated in the
upper right corner.
Tap
Presentation
to start sharing
content and
to conduct
presentations.
Press the
Microphone
button to
mute / unmute
Press and hold
microphone.
the left side of the
Volume button
to decrease the
loudspeaker volume
and the right side to
increase the volume.