TRENDnet User's Guide
© Copyright 2017 TRENDnet. All Rights Reserved.
SNMP Settings
System > SNMP
SNMP v2c
1. Log into your access point management page (see
management
page" on page 28).
2. Click System and click on SNMP. Review the settings and click Save to apply the
changes.
Active – Enable or disable SNMP version 2c.
RO Community – Enter the read only community name.
RW Community – Enter the ready/write community name.
TEW-740APBO / TEW-740APBO2K
"Access your access point
31