Client Bridge + Ap Mode; Set The Device To Client Bridge + Ap Mode; Set The Device Ip Address Settings - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide

Client Bridge + AP Mode

Client Bridge mode functions similar to that of a wireless client adapter like the one built
into your notebook PC or mobile device. It wireless connects to a wireless network
provided by a wireless AP or router and bridges this connection to the device Ethernet
ports. Additionally, in Client Bridge mode, the device can function as an AP and create
another wireless network to also bridge over it's connection from the wireless AP or
router.

Set the device to Client Bridge + AP mode

System > Mode Setup
1. Log into your access point management page (see
management page" on page 28).
2. Click System and click on Mode Setup.
3. Select Client Bridge + AP Mode in the mode drop down list. Then click Save &
Reboot.
© Copyright 2017 TRENDnet. All Rights Reserved.
"Access your access point

Set the device IP address settings

System > LAN Setup
To set the IP address, gateway, and DNS settings, click on System and click on LAN
Setup. Click Save when you have completed your settings.
TEW-740APBO / TEW-740APBO2K
57