Time Policy / Schedule - TRENDnet TEW-740APBO User Manual

TRENDnet User's Guide
 MAC Address – Enter the device MAC address to apply the access control rule.
(ex. 00:11:22:AA:BB:CC) and click Add to add it to the list. You can apply the rule
to multiple MAC addresses.
 IP Address Setup
o
Local IP Address – Enter the IP address range to apply the rule.
o
Local Port – Enter the local port number.
o
Destination IP Address – Enter the destination IP address to apply the
rule.
o
Destination Port – Enter the destination port number.
© Copyright 2017 TRENDnet. All Rights Reserved.

Time Policy / Schedule

Advance > Time Policy
For additional security control, you can create schedules to specify a time period when a
feature should be activated or deactivated. Before you use the scheduling feature,
ensure that your device/system time is configured correctly under System > Time
Server.
1. Log into your access point management page (see
management page" on page 28).
2. Click Advance and click on Time Policy.
3. In the first Time Policy entry in the list. Click Edit.
4. Review the settings and click Save when changes are completed.
 Comment – Enter a name for the time policy so it can be easily identified.
 Mode:
o
On Schedule: For the rule used, the schedule will be activated during
the time period defined in the schedule and deactivated any time
period outside of the defined schedule.
TEW-740APBO / TEW-740APBO2K
"Access your access point
65