Panasonic KX-TDE100 Installation Manual page 124

3.8 Connection of Extensions
With DPT
Parallel mode or eXtra Device Port (XDP) mode can be selected through system programming.
If XDP mode is enabled through system programming, parallel connection is not possible. Refer to "1.11.9
Parallelled Telephone" and "2.1.1 Extension Port Configuration" in the Feature Manual for further
information.
Using a Modular T-Adaptor
To DHLC8 card
4-conductor wiring cord
Connect pins "D1" and
"D2".
Using an EXtra Device Port
With KX-T7600 Series DPT (except KX-T7665)
To DHLC8 card
4-conductor wiring cord
Connect pins "T", "R",
"D1" and "D2".
To DHLC8 card
To SLT
124 Installation Manual
Modular
T-Adaptor
2-conductor wiring cord
Connect pins "T" and "R".
DPT
2-conductor wiring cord
Connect pins "T" and "R".
DPT
TO MAIN UNIT
/ PABX
SLT
SLT
TO TEL