Download  Print this page

Procedure Overview - Panasonic KX-TDE100 Installation Manual

Pure ip-pbx.
Hide thumbs

Advertisement

3.9.2

Procedure Overview

When connecting the wireless system, use extreme care in conducting the site survey. An incorrectly
performed site survey can result in poor service area, frequent noise, and disconnection of calls.
1. Investigate the installation site
Refer to "3.9.3 Site Planning".
a.
Obtain a map of the CS installation site.
b.
Identify the service area required by the user on the map.
c.
Plan the location of each CS, taking account of distance, building materials, etc.
2. Prepare the CS for site survey
Refer to "3.9.4 Before Site Survey".
a.
Assign a CS number to each CS by setting the DIP switches on the back of the CS.
b.
Supply electricity to each CS using an AC adaptor or a battery box.
c.
Install each CS temporarily as planned.
Notes
Install at least 2 m (6 ft 7 in) above the floor.
Keep the antennas in the upright position.
3. Conduct the site survey
Refer to "3.9.5 Site Survey".
a.
Test the radio signal strength using the PS.
Confirm that the radio signal strength level is "12" near the CS.
Using the KX-TD7684/KX-TD7685/KX-TD7694/KX-TD7695
Press 1, 9, and POWER
for more than 2 seconds.
Using the KX-TD7680
Press 1, 9, and POWER
for more than 2 seconds.
Using the KX-TD7690
Press 1, 9, and POWER
for more than 2 seconds.
b.
By walking away from the CS with the PS, check the radio signal strength. The radio signal strength
weakens as you walk away from the CS.
c.
Map the CS coverage area at radio signal strength levels "3" and "8".
3.9 Connection of 2.4 GHz Portable Stations
Display example:
CS No.
<< SEARCHING >>
1 to 9
Display example:
CS No.
<< SEARCHING >>
1 to 9
Display example:
CS No.
<< SEARCHING >>
1 to 9
CS NO.1 LEVEL:12
SAVE:0123456789
CS NO.1 LEVEL:12
SAVE:0123456789
CS NO.1 LEVEL:12
SAVE:0123456789
Installation Manual
131

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TDE100

This manual is also suitable for:

Kx-tde200

Comments to this Manuals

Symbols: 0
Latest comments: