Installation of the KX-TDE Maintenance
Installing and Starting the KX-TDE Maintenance Console
Required Operating System
Microsoft Windows 2000, Windows XP, or Windows Vista
Minimum Hardware Requirements
CPU: 300 MHz Intel Celeron microprocessor
HDD: 100 MB of available hard disk space
RAM: 128 MB of available RAM
Installing the KX-TDE Maintenance Console
Make sure to install and use the latest version of the KX-TDE Maintenance Console.
To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP
Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.
1. Copy the setup file of the KX-TDE Maintenance Console to your PC. (Its icon is shown here, on the left.)
2. Double-click the setup file to run the installer.
3. Follow the on-screen instructions provided by the installation wizard.
Starting the KX-TDE Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDE Maintenance Console with the Installer Level Programmer Code and connect
to the PBX for the first time after initialization (with the factory default setting), Quick Setup will launch
automatically. During Quick Setup, you will set up the basic items. For details about the basic items, refer to
"2.3.4 Quick Setup" in the Feature Manual.
Connect the PC to the PBX with an Ethernet straight cable or RS-232C.
Start the KX-TDE Maintenance Console from the Start menu.
"Information before programming" appears.
Carefully read this important additional information, which includes updates to this and other
Click OK to close this window.
4.3 Installation of the KX-TDE Maintenance Console