3.3 Information about the Main Processing Card
Notes
•
The maximum length of the cable to be connected to the IPCMPR card is 100 m (328 ft).
•
When connecting the RJ45 connector, attach the ferrite core included with the PBX. Refer to "3.2.8
Attaching a Ferrite Core".
•
For details about Virtual Slots, refer to "1.4.3 System Capacity".
•
For details about the activation keys, refer to "2.1 Information about the Activation Keys".
•
For details about connecting to a LAN, refer to "3.12 LAN Connection".
•
For details about connecting peripherals, refer to "3.11.1 Connection of Peripherals".
•
For details about System Initialize Switch, refer to "3.14.1 Starting the PBX".
•
For details about Reset Button, refer to "5.1.4 Using the Reset Button".
WARNING
A LITHIUM BATTERY IS USED IN THE IPCMPR CARD. THERE IS A RISK OF EXPLOSION
IF THE BATTERY IS REPLACED WITH THE INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.
CAUTION
•
Use only the SD Memory Card included with the PBX.
•
The SD Memory Card contains software for all the processes of the PBX and all the customer data.
The SD Memory Card must be inserted before startup.
•
Do not remove the SD Memory Card while power is supplied to the PBX. Doing so may cause the
PBX to fail to start when you try to restart the system.
•
To prevent data leakage, render the SD Memory Card physically unusable before disposal.
Pin Assignments
RJ45 Connector (10BASE-T/100BASE-TX)
No.
1
1
2
3
8
4-5
6
7-8
80
Installation Manual
Signal Name
TPO+
TPO-
TPI+
Reserved
TPI-
Reserved
Input (I)/Output (O)
O
O
I
–
I
–
Function
Transmit data+
Transmit data-
Receive data+
–
Receive data-
–