Panasonic KX-TDE100 Installation Manual page 176

4.3 Installation of the KX-TDE Maintenance Console
4. a.
Enter the Installer Level Programmer Code (default: INSTALLER).
The Programmer Code authorizes different programming levels, and the Quick Setup is only
available when you start the KX-TDE Maintenance Console with the Installer Level Programmer
Code.
Note
There are 2 other Programmer Codes with limited authorisation: Administrator Level (default:
ADMIN), and User Level (default: USER).
b.
Click OK.
Click Connect → LAN or RS-232C from the menu bar, depending on the serial interface
5. a.
connection with the PBX.
b.
In the next screen, enter the system password for installer (default: 1234).
c.
Click OK.
6. Follow the instructions of the Quick Setup wizard and assign the basic items (Quick Setup).
The system menu appears. You may now begin programming the PBX.
Notes
• During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the system
is reset for some reason, all the system data in RAM will be lost. However, if system data has been
saved to the SD Memory Card, it can be easily restored.
To save the system data to the SD Memory Card, (1) click the "SD Memory Backup" icon before
resetting the PBX or turning off the power, or (2) exit the KX-TDE Maintenance Console so that the
PBX automatically saves the system data.
• When programming PBX data which can be displayed on a proprietary telephone (PT) (extension
names, group names, System Speed Dialing names, etc.), it is possible to enter characters which
cannot be displayed on a KX-T7600 series PT.
Characters which can be displayed on a KX-T7600 series PT are shown below in the white cells.
176 Installation Manual