Using The Reset Button - Panasonic KX-TDE100 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

5.1.4

Using the Reset Button

If the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system
feature again to confirm whether there definitely is a problem or not.
CAUTION
In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD
ACCESS" LED is off before pressing the Reset Button.
Notes
When the System Initialize Switch is set to "NORMAL", pressing the Reset Button causes the
following:
Camp-on is cleared.
Calls on hold are terminated.
Calls on exclusive hold are terminated.
Calls in progress are terminated.
Call park is cleared.
Other data stored in memory, except the above, are not cleared.
Be aware that pressing the Reset Button with the System Initialize Switch in the "SYSTEM
INITIALIZE" position clears all data stored in the PBX. Do not perform this operation unless you
intend to delete all data from the PBX.
Operation
If the PBX does not operate properly:
1.
Slide the System Initialize Switch to the "NORMAL" position.
2.
Press the Reset Button for about 1 second.
RUN Indicator
LED
Reset Button
System Initialize Switch
5.1 Troubleshooting
Installation Manual
187

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents