Activation Key File - Panasonic KX-TDE200 Installation Manual

Pure ip-pbx
Hide thumbs Also See for KX-TDE200:
Table of Contents

Advertisement

2.1.3 Activation Key File

2.1.3 Activation Key File
The corresponding number of IP trunks and IP telephones or enhanced features can be activated by installing
the downloaded activation key file(s) in the SD Memory Card of the IPCMPR card using the Maintenance
Console.
Installing the Activation Key File in the SD Memory Card
Make sure to install the Maintenance Console on the PC in advance, and connect the PC to the PBX. For
details about the Maintenance Console, refer to "Section 4 Guide for the Maintenance Console".
1.
Start the Maintenance Console from the Start menu on the PC.
2.
From the Utility menu, select File Transfer PC to PBX (SD Card).
A dialogue box will be displayed.
3.
Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
4.
Click OK.
5.
Under Configuration, click Slot.
6.
Click Activation Key.
7.
For IP trunk activation key file(s), click Execute.
A confirmation message will be displayed. Click Yes.
Note
It is necessary to restart the PBX to activate the Software Upgrade 01 activation key after performing
the procedure above. To restart the PBX, refer to "5.1.4 Using the Reset Button".
For information about programming activation keys using the Maintenance Console, refer to "3.3 [1-1]
Slot—Activation Key" in the PC Programming Manual.
CAUTION
The activation key file can only be installed in the PBX with the MPR ID number entered when the activation
key file was downloaded. The activation key file cannot be reissued unless the IPCMPR card crashes.
46
Installation Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde100

Table of Contents