3.12 Lan Connection - Panasonic KX-TDE100 Installation Manual

3.12 LAN Connection

3.12 LAN Connection
3.12.1 LAN Connection
Connection Chart for LAN Connection
The PBX is equipped with an RJ45 port for connecting to a LAN so that IP telephones (IP-PTs, IP
softphones, SIP Extensions), PCs and a CTI Server can be connected on a private IP network.
PC
CTI Server
IP-PT
Notes
• Use an Ethernet straight cable with an RJ45 connector for connection to a switching hub. The cable
should be a 10BASE-T/100BASE-TX CAT 5 or higher cable.
• Make sure that all the CAT 5 cables in use are not over 100 m (328 ft) in length.
• Make sure to create a spanning tree for LAN connection in order to prevent loops from occurring
in a multi-bridged environment. Otherwise, some packets may circulate for long periods of time and
eventually PBX performance system may degrade.
166 Installation Manual
IP Softphone
(for LAN Connection)
Switching Hub
SIP Extension
Switching Hub
Pin No.
Signal Name
TX+ 1
TX- 2
RX+ 3
RX- 6
RJ45
PBX (RJ45)
Pin No.
Signal Name
1
RX+
2
3 TX+
6
RX-
TX-