SU 26M-EP -
Item code: BH97
INSTALLING THE SPINNER.
Install the spinner backplate, propeller and
spinner cone. The spinner cone is held in
place using two 3mm x 12mm wood screws.
Secure.
Secure.
8
.
SERVO ELEVATOR AND RUDDER
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
2. Mount the servo to the tray using the
mounting screws provided with your radio sys-
tem.
Bottom side
Instruction Manual
HORIZONTAL STABILIZER.
See pictures below: