Black Horse Model SU 26M-EP Instruction Manual Book page 9

SU 26M-EP -
Item code: BH97
C/A glue
C/A glue
1. Draw a center line onto the horizontal
stabilizer. Then slide the horizontal into the
fuselage.
Center line.
2 Using a modeling knife, cut away the
covering from the fuselage for the stabilizer
and remove it.
.
3. Mark the shape of the vertical on the left
and right sides onto the horizontal stabilizer
using a felt-tip pen
4. Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove the
covering from between them using a modeling
knife.
When cutting through the covering to re-
move it, cut with only enough pressure to
only cut through the covering it's self. Cut-
ting into the balsa structure may weaken
it. This could lead to possible failure dur-
ing flight.
Instruction Manual
Mark line
R e m o v e
covering.
9