Table of Contents
Advertisement
4.2 LAN Ethernet Connection
A LAN Ethernet connection connects local computers to GlobeSurfer 3G using
Ethernet cables, either directly or via network hubs and switches. The LAN
Ethernet Properties screen displays a summary of the connection properties.
Figure 4.11: LAN Ethernet Properties
Clicking on the Settings button at the bottom-right of the connection's Proper-
ties window, will open its Configuration window.
Figure 4.12: LAN Ethernet Configuration
4.2.1 General Network Connection Parameters
The top part of the configuration window displays general communication pa-
rameters. It is recommended not to change the default values in this screen un-
less you are familiar with the networking concepts they represent. Since your
GlobeSurfer 3G is configured to operate with the default values, no parameter
modification is necessary. You can configure the following general connection
settings:
Schedule You can configure scheduler rules in order to define time segments
during which the connection is active. To configure scheduler rules click
the New link. To learn how to configure scheduler rules please refer to
Section 6.11.
27
Advertisement
Table of Contents
