Applying Corporate-Grade Security - Option Audio GlobeSurfer 3G Reference Manual

5.11 Applying Corporate-Grade Security

The following set of instructions is designed to assist you in applying corporate-
grade security standards to your network. When implementing these instruc-
tions, it is important to execute the configuration steps in the exact order they
are presented.
To apply corporate-grade firewall security standards perform the following:
• Do not allow non-administrative services access to the LAN:
1. Open a Telnet session from a LAN host that is connected to GlobeSurfer
3G.
2. Telnet to GlobeSurfer 3G at address 192.168.1.1.
3. Logon to GlobeSurfer 3G as an administrator (The default username
and password are both admin).
4. After logging on, issue the following command at the prompt:
OpenRG> r g c o n f s e t fw/ p r o t e c t / a l l o w r g r e m o t e a d m i n i s t r a t i o n o n l y 1
OpenRG> r e c o n f 1
OpenRG> e x i t
• Configure GlobeSurfer 3G to permit only HTTPS as means of remote ad-
ministration:
1. Click Security on the sidebar.
2. Click the Remote Administration tab.
3. Enable the following check boxes:
– Using Primary HTTPS Port (443)
– Using Secondary HTTPS Port (8443)
134