Advanced users can fully configure and control the GlobeSurfer 3G via the
web-based management console. Chapter
2
serves as an introduction to the
management console; in-depth module-specific information is available through-
out chapters
4
– 7.
1.7 Adding Computers to Your Network
Any computers with a 802.11b/g wireless adapter will be able to connect to
the WLAN created with the GlobeSurfer 3G. To connect additional computers
without a wireless adapter to your GlobeSurfer 3G, connect a hub or switch
to the LAN port, and then connect the computers to the hub or switch. Make
sure to configure all computers to automatically obtain a network address as
described above.
10