Table of Contents
Advertisement
6.10 Date and Time
To configure date, time and daylight savings time settings perform the follow-
ing:
1. Click Date and time on the Advanced screen of the management console.
The Date and time settings screen will be displayed (see figure 6.30).
2. Select the local time zone from the pull-down menu. GlobeSurfer 3G can
automatically detect daylight saving setting for the selected time zone.
If the daylight saving settings for your time zone are not automatically
detected, the following fields will be displayed:
Enabled Select this check box to enable daylight saving time.
Start Date and time when daylight saving starts.
End Date and time when daylight saving ends.
Offset Daylight saving time offset.
3. If you want the GlobeSurfer 3G to perform an automatic time update,
perform the following:
• Select the Enabled checkbox under the Automatic time update section.
• Select the protocol to be used to perform the time update by select-
ing either the Time of Day (TOD) or Network Time Protocol (NTP) radio
button.
• Specify how often to perform the update in the Update every field.
• You can change the default time server address by clicking the New
entry link in the bottom of the Automatic time update section.
Figure 6.30: Date and time settings
163
Advertisement
Table of Contents
