Table of Contents
Advertisement
Figure 4.109: Network Connections
4.7.1.2 Configuring IPsec on the Windows Host
The following IP addresses are needed for the host configuration:
• Windows IP address - referred to as "windows ip".
• GlobeSurfer 3G WAN IP address - referred to as "openrg wan ip".
• GlobeSurfer 3G LAN subnet address - referred to as "openrg lan subnet".
The configuration sequence:
1. The first step is to create the IPsec policy:
(a) Click the Start button and select Run. Type "secpol.msc" and click
OK. The Local Security Settings window will appear (see figure 4.110).
Figure 4.110: Local Security Settings
(b) Right-click the IP Security Policies on Local Computer and choose Cre-
ate IP Security Policy.... The IP Security Policy Wizard will appear
(see figure 4.111).
82
Advertisement
Table of Contents
