Internet Protocol Settings; Dns Server - Option Audio GlobeSurfer 3G Reference Manual

802.11b/g wireless router and internet gateway

Table of Contents

Support Microsoft CHAP Version 2 Select this check box if you are commu-

nicating with a peer that uses Microsoft CHAP Version 2 authentication

protocol.

4.1.4 Internet Protocol Settings

Select one of the following Internet protocol options from the Internet protocol

drop down menu:

• Obtain an IP address automatically

• Use the following IP address

Please note that according to the selection you make in the Internet protocol

drop down menu, the screen will refresh and display relevant conﬁguration

settings.

Obtain an IP address automatically Your PPP connection is conﬁgured by de-

fault to obtain an IP address automatically. You should change this con-

ﬁguration in case your service provider requires it.

The server that assigns the GlobeSurfer 3G with an IP address, also as-

signs a subnet mask. You can override the dynamically assigned subnet

mask by selecting the Override subnet mask and specifying your own mask

instead.

Figure 4.5: Internet Protocol Settings – Automatic IP

Use the following IP address Your WAN connection can be conﬁgured using

a permanent (static) IP address. Your service provider should provide

you with this IP address, subnet mask and the default gateway IP ad-

dress.

Figure 4.6: Internet Protocol Settings – Static IP

Domain Name System (DNS) is the method by which website or domain names

are translated into IP addresses. You can conﬁgure the connection to auto-

matically obtain a DNS server address, or specify such an address manually,

according to the information provided by your ISP.

Table of Contents