Table of Contents
Advertisement
6.13 Point-to-Point Tunneling Protocol (PPTP)
To access the PPTP settings click the PPTP icon from the Advanced screen. The
Point-to-Point Tunneling Protocol (PPTP) screen will appear (see figure 6.38).
This screen enables you to configure:
• The remote users that will be granted access to your local network.
• The IP address range an authorized remote user can use when accessing
your local network.
• Advanced PPTP client/server connection settings.
6.13.1 Managing Remote Users
Select the Users link to define and manage remote users (see figure 6.39).
You can add, edit and delete users allowed to access the GlobeSurfer 3G and
your local network by managing the user table as described in Section 2.5. To
add a new user click New user in the table and specify the following parameters:
• Full name: The remote user's full name.
• Username: The name the remote user will use to access your local net-
work.
Figure 6.38: PPTP Settings
Figure 6.39: User table
168
Advertisement
Table of Contents
