Table of Contents
Advertisement
6.11 Scheduler Rules
Scheduler rules are used for limiting the activation of settings, such as firewall
rules, to specific time periods, specified in days of the week, and hours.
To define a Rule:
1. Click Scheduler rules on the Advanced screen of the management console.
The Scheduler rules screen will appear (see figure 6.31).
2. Click the New scheduler entry link. The Scheduler rule edit screen will ap-
pear (see figure 6.32).
3. Specify a name for the rule in the Name field.
4. Specify if the rule will be active/inactive during the designated time pe-
riod, by selecting the appropriate Rule activity settings check-box.
5. Click the New time segment entry link to define the time segment to which
the rule will apply — the Time segment edit screen will appear (see fig-
ure 6.33).
(a) Select active/inactive days of the week.
(b) Click the New time segment entry link to define an active/inactive
hourly range.
6. Click OK.
Figure 6.31: Scheduler Rules
Figure 6.32: Scheduler Rule Edit
164
Advertisement
Table of Contents
