Table of Contents
Advertisement
6.17 Diagnostics
The Diagnostics screen can assist you in testing network connectivity. This
feature will enable you to ping (ICMP echo) an IP address and view statistics
such as the number of packets transmitted and received, round trip time and
success status.
6.17.1 Diagnosing Network Connectivity
To diagnose network connectivity perform the following steps:
1. Click Diagnostics on the Advanced screen of the management console. The
Diagnostics screen will appear (see figure 6.48).
2. Enter the IP address to be tested in the Destination field.
3. Click the Go button in the Ping section.
4. After a few seconds, diagnostics statistics will be displayed. If no new
information is displayed, click the Refresh button.
Figure 6.48: Advanced Diagnostics
179
Advertisement
Table of Contents
