Advanced Pptp Server Settings; Advanced Pptp Client Settings - Option Audio GlobeSurfer 3G Reference Manual

802.11b/g wireless router and internet gateway

Table of Contents

• Select the System and Security notiﬁcation levels in the System notify level

and Security notify level combo boxes respectively.

6.13.2 Advanced PPTP Server Settings

To conﬁgure advanced PPTP server settings click the Advanced button on the

Point-to-Point Tunneling Protocol (PPTP) screen (see ﬁgure 6.38). The advanced

settings will appear (see ﬁgure 6.41). This screen enables you to conﬁgure the

following:

• Enabled: Enable or disable the PPTP server.

• Max. idle time to disconnect in seconds: Specify the amount of idle time

(during which no data is sent or received) that should elapse before the

GlobeSurfer 3G disconnects a PPTP connection.

• Authentication/Encryption required: Select whether PPTP will use au-

thentication, encryption, or both.

• Allowed authentication algorithms: Select the algorithms the server may

use when authenticating its clients.

• Allowed encryption algorithms: Select the algorithms the server may

use when encrypting data.

• Remote address range: Specify the range of IP addresses remote users

can use to access your local network.

Please note that the client settings must be in tune with the server settings.

Figure 6.41: Advanced PPTP Server Settings

The PPTP connections are displayed in the Point-to-Point Tunneling Protocol

(PPTP) screen (see ﬁgure 6.38). To conﬁgure advanced PPTP client settings

170

Table of Contents