1. Primary/secondary HTTP ports
2. Primary/secondary HTTPS ports
3. Primary/secondary Telnet ports
4. Secure Telnet over SSL ports
6.1.4 System Logging Settings
Use this section to configure the following:
1. System log buffer size
2. Remote system notify level
• None
• Error
• Warning
• Information
6.1.5 Security Logging Settings
Use this section to configure the following:
1. Security log buffer size
2. Remote security notify level
• None
• Error
• Warning
• Information
6.1.6 Outgoing Mail Server Settings
Use this section to configure the following:
1. Enter the hostname of your outgoing (SMTP) server in the Server field.
2. Each email requires a from address and some outgoing servers refuse to
forward email without a valid from address for anti-spam considerations.
Enter a from email address in the From email address field.
3. If your outgoing email server requires authentication check the Server
requires authentication checkbox and enter your username and password
in the Username and Password fields respectively.
6.1.7 HTTP interception
By default the GlobeSurfer 3G is configured to intercept HTTP access to Inter-
net web sites when no Internet connection is established. Interception means
that you are directed to a page with information on how to connect the GlobeSurfer
3G to the Internet.
140