Table of Contents
Advertisement
3. When you have read the SMS you can click any of the buttons underneath
to:
• Reply to the sender. You will then be moved to the SMS create
screen with the received text displayed and the phone number of
the sender already filled in (see Section 3.2).
• Delete the SMS. Note: The SMS is deleted immediately without con-
firmation and is not possible to restore.
• Archive the SMS (see Section 3.3).
• Forward the SMS. You will be moved to SMS Create with the re-
ceived text displayed (see Section 3.3).
3.2 Creating an SMS
1. Select the SMS create tab of the SMS Manager.
2. Type your message text in the SMS message field. The Characters left field
shows how many characters you can type before the size limit is reached.
3. Enter the phone number of the receiver in the Phone numbers field. Ad-
ditional numbers can be separated with a comma. Maximum 10 numbers
are allowed. The phone number should be formated like +49176123456789
for international and like 0176123456789 for national numbers.
4. Select the Flash SMS checkbox if you want the SMS to be shown in full on
the receiver's display immediately when received (not supported by all
mobile terminals).
5. Click the Send button when ready. Or click the Save as template button to
save the message as a template for future use.
Figure 3.2: Reading an SMS
16
Advertisement
Table of Contents
