Table of Contents
Advertisement
6.19 SIM Setup
The SIM card in the GlobeSurfer 3G requires a PIN code to be entered before
it can be used. The PIN code you receive from your ISP can be changed to a
PIN code of your own. By default the PIN code is required but it can be stored
in the GlobeSurfer 3G after the first use so that you don't have to enter it more
than once. These settings can be changed but note that you should disconnect
before doing any changes to the SIM setup.
To change the settings of your SIM card, perform the following:
1. Click SIM Setup on the Advanced screen of the management console. The
SIM Setup screen will appear (see figure 6.50).
2. Enter the PIN code in the first field to be able to change any settings.
3. By default the PIN is enabled. To disable the PIN, de-select the first En-
abled checkbox.
4. To be forced to enter the PIN code each time the GlobeSurfer 3G is started,
de-select the Enabled checkbox at Save PIN.
5. If you want to change the PIN code, enter a new PIN code in the last two
fields.
6. Click OK to save your changes.
Figure 6.50: SIM Setup
182
Advertisement
Table of Contents
