Table of Contents
Advertisement
6.7 Routing
6.7.1 Managing Routing Table Rules
To access the routing table rules click the Routing icon from the Advanced screen.
The Routing screen will appear (see figure 6.17).
You can add, edit and delete routing rules from the routing table in the manner
described in Section 2.5. When adding a routing rule, you need to specify:
• Name: Select the type of network device (LAN Bridge or WAN UMTS)
• Destination: The destination is the destination host, subnet address, net-
work address, or default route. The destination for a default route is
0.0.0.0.
• Netmask: The network mask is used in conjunction with the destination
to determine when a route is used.
• Gateway: Enter the IP address of the GlobeSurfer 3G.
• Metric: A measurement of the preference of a route. Typically, the lowest
metric is the most preferred route. If multiple routes exist to a given
destination network, the route with the lowest metric is used.
Figure 6.17: Routing Rules
Figure 6.18: Routing Rule Settings
153
Advertisement
Table of Contents
