Insert Sim Card; Connect To Internet - Option Audio Xyfi User Manual

Power Up XYFI

Connect to Internet

Connect to Administration Pages

1.1 Insert SIM Card

Before connecting the XYFI to you PC/tablet/smartphone etc. for the first time, you must insert the SIM card supplied by your service
provider:
1) Remove the top cover of the XYFI.
2) Insert the SIM card and the optional micro-SD card into the corresponding card slots.
3) Put the top cover back on by inserting it into the slot at the front and press the cover down until it clicks into place.
1.2 Power Up XYFI
For XYFI to be able to connect to any Mobile or WiFi networks, it needs to be switched on. Before you connect it to a power source,
you need to fully extend the unique USB connector (180 degrees) by pushing the button on the top of the XYFI.
XYFI can use several different power sources:
Computer: Insert the XYFI into a free USB port on your computer.
USB Power Adapter: Switch on the XYFI via the 110-240v power socket.
USB Cigarette Lighter Adapter: Use your XYFI in cars/boats/buses etc. or other places where you have a 12V cigarette lighter
socket.
USB Battery Pack: When travelling, this is the ideal way to power the XYFI.
Others: Such as Car Stereo, Playstation, Wii etc. (with USB connection)...Please make sure that it offers min. 5V/1 Amp output
power.
Note: You should only use the original Wall Adapter/Car Adapter and Battery Pack as replacement power sources may damage your
XYFI and make it less reliable. Option NV is not responsible for damage caused by using non-Option NV products.
1.3 Connect to Internet
XYFI comes with pre-defined settings that makes it very easy for you to connect to the Internet:
1) Your XYFI is pre-configured with WPA2 encryption to protect unauthorised access. The unique Network Name (SSID) and WiFi
Password (Pre-shared key) are printed on the manufacturing label underneath the bottom cover.
2) When your XYFI is switched on, find the Network Name (SSID) in your list of available networks and click Connect.
3) You will be asked to fill in the WiFi password, and when this is done, you are connected to the Internet.
If your PIN code is not disabled, or if it is not a known APN address, you will be guided to the settings pages to make the changes
before being able to connect to the Internet.
International roaming is disabled by default, and if you use the XYFI for the first time in this situation, you need to enable roaming
within the settings pages or manually click the connect button.
1.4 Connect to Administration Pages
The administration pages give you access to see/edit all the settings for the XYFI, in addition to the connection status etc. In order to
log in to the administration pages (valid both for desktop and mobile version):
1a) Desktop: Open your Internet browser and type xyfi/ in the address bar (or 172.22.2.1) and press 'Enter'.
1b) Mobile (smartphone): Open your Internet browser and type xyfi/ in the address bar. If 'xyfi/' does not send you to the mobile
site, type m.xyfi/ (or 172.22.2.1) and press 'Go'.
2) The Log In page will open and you have to create/insert your username and password (case sensitive) to enter the administration
pages.
You can save this address as a bookmark in your browser or add to your home screen, for future use.
2. Home
This is your XYFI homepage where you can carry out basic connection settings.
Connection Bar
Status Bar
Manage Users and your XYFI
Connect a device to XYFI using WiFi Protected Setup
Active Users