Intermec EasyCoder PF2i Installation Instructions Manual page 43

Region (a.k.a. Regulatory Domain)
Some countries and regulatory authorities only allow the use of a subset
of the 14 channels specifi ed in the 802.11b/g standard. To make the
product world confi gurable the setup variable ".REGION" is used.
Th e region can only be set by personnel authorized by Intermec. If the
wrong region/domain is set, please contact your Intermec representative
immediately. Continued use of the EasyLAN Wireless network interface
with an incorrect REGION setting may be in violation of applicable
laws.
Th e region setting will not be reset to default, even if a factory default
upgrade is performed.
Th e following regulatory domains are implemented:
Value
FCC (or USA)
IC (or Canada)
ETSI (or EU)
MKK (or Japan)
1 /. Certain restrictions apply to outdoor use in France.
SETUP GET "wlan",".REGION",A$
Gets the active region in A$.
EasyLAN Wireless Interface Kit Installation Instructions
Countries
U.S.A
Canada
1
EU countries + Iceland,
Liechtenstein, Norway, and
Switzerland
Japan
Chapter 4 — Setup in Fingerprint
Allowed channels
1-11 (default)
1-11
1-13
1-14
39