Chapter 4 — Setup in Fingerprint
To reinstall the default root CA certifi cate, install /rom/intermec.cer, or
remove the /c/ADMIN/root.cer fi le.
Examples
SETUP "8021x","EAP_TYPE","TTLS|LEAP|PEAP|OFF"
Sets preferred EAP type.
SETUP "8021x","EAP_USER","Admin01"
Sets logon username to "Admin01".
SETUP "8021x","EAP_PASS","InfoTech"
Sets logon password to "InfoTech".
SETUP "8021x","TTLS_USER","Manufacturing"
Sets TTLS outer name to "Manufacturing".
SETUP "8021x","INNER_AUTH","PAP|MSCHAPv2|EAP/
MSCHAPv2|EAP/MD5|EAP/GTC"
Sets inner authentication type (TTLS/PEAP only).
SETUP "8021x","CA_CERT","/tmp/mycacert.cer"
Installs overriding CA certifi cate (TTLS/PEAP only).
SETUP "8021x","CA_CERT","/tmp/mycacert.
pfx@verysecret"
Installs overriding CA certifi cate (TTLS/PEAP only), encrypted with the
pass phrase "verysecret".
SETUP "8021x",".SERVER_CN1","Printer33"
Sets common name 1 to "Printer33" (TTLS/PEAP only).
SETUP "8021x",".SERVER_CN2","Printer34"
Sets common name 2 to "Printer34" (TTLS/PEAP only).
SETUP "8021x","VALIDATE","ON|OFF"
Enables or disables validation of the server certifi cate (TTLS/PEAP
only).
SETUP WRITE/GET for all settings returns the set value, except for
EAP_PASS which always returns "****" if confi gured, and for "CA_
CERT" which returns the common name of the last certifi cate authority
successfully installed (but not the path to the fi le).
36
EasyLAN Wireless Interface Kit Installation Instructions