Physical Installation - Intermec EasyCoder PF2i Installation Instructions Manual

EasyLAN Wireless Interface Kit Installation Instructions
2

Physical Installation

Th is chapter describes how to physically install the
EasyLAN Wireless interface kit in a PF2/4i-, PM4i-,
or PX4/6i-series printer.
Th e installation described in this chapter
must only be performed by an authorized
service technician. Intermec assumes
no responsibility for personal injury or
damage to the equipment if the instal-
lation in performed by an unauthorized
person.
Take precautions against electrostatic
discharges, for example by wearing
grounded bracelets.
Note: When the EasyLAN Wireless
interface is factory-installed in a printer,
the antenna is packed separately in the box
and must be fi tted to its connector on the
printer's rear plate as illustrated at the end
of this chapter.
13