Using Ams Device Manager To Configure The Meter - Emerson Daniel 3812 Installation Manual

Daniel 3812 Liquid Ultrasonic Flow Meter Installation Manual
3-9000-765 Rev H
4.3 Using AMS Device Manager to configure the
meter
This procedure assumes you have AMS Device Manager installed on the host computer and have
downloaded the latest Daniel Liquid Ultrasonic Meter Device Description (DD).
If not installed, click the link below to download the AMS device installation tool kit.
http://www2.emersonprocess.com/en-US/documentation/deviceinstallkits/Pages/devicein-
stallkitsearch.aspx
Procedure - installing AMS Device Description
1.
2.
3.
4.
5.
6.
7.
8.

Using AMS Device Manager to configure the meter

Use the link above to search for the Device Description (DD) for your Daniel 3810 Series
Liquid Ultrasonic Flow Meter.
Use the pull-down menu and select the Brand/Manufacturer -
Next select the Device,
Liquid 3810 Series
Choose the
Device Revision1
Next, select from the Communication Protocol menu.
HART
Select
AMS Device Manager
Select the
Host System Revision 11.5
Verify your search parameters are correct, as shown below.
from the pull-down menu.
, from the pull-down menu.
for the Host System.
.
Section 4: Configuration
June 2017
Emerson Daniel Industries
81
.